CONVEY-ALL CST-1634, Руководство оператора

Страница: 20 / 50

Operator’s Manual: Commercial Seed Tender (CST-34 Series)
3-2 01.2016
3.1 MACHINE COMPONENTS
The Commercial Seed Tender is available in three
sizes depending on the required seed capacity.
The CST is shown mounted onto a truck bed. The
owner is responsible for mounting the tender onto a
truck with sufficient load capacity.
A self-contained hydraulic power pack is an option. If
equipped, it would be mounted onto the driver side.
It would consists of an engine and battery, fuel tank,
hydraulic pump, oil reservoir and associated plumbing.
A remote control is also an option. The receiver
would be mounted inside the rear hopper support. All
operations on the tender could be controlled remotely.
Manual overrides are included. Each hopper can be
opened or closed individually.
The main components are shown below.
*
The position of components may vary depending
on the model.
a. Hoppers (number varies by model)
b. Hopper Discharge Gate
c. Folding Conveyor
d. Slave Conveyor
e. Slave Conveyor Discharge Spout
f. Hydraulic Valves
g. Remote Control Handset (Optional)
h. Ladder
i. Catwalk with Rail
j. Canvas Tarp
k. Tarp Controls
l. Document Container
Fig 3 - Left Side of CST-1834, Remote Control Handset Above
a
j
g
i
b l k b d
e
f
h b
c