CONVEY-ALL CST-1634, Руководство оператора

Страница: 21 / 50

01.2016 3-3
Operator’s Manual: Commercial Seed Tender (CST-34 Series)
3.2 COMPONENTS AND CONTROLS
Before starting to work, all operators should familiarize
themselves with the location and function of all the
controls.
Hydraulic Valve Bank:
All machine functions are controlled by the bank of
hydraulic valves mounted on the rear left frame. Each
valve is designed with a flow control as part of the
base.
On a standard tender, the hydraulics are connected
to the truck’s system.
The valve functions are as follows:
a. Gate Valves:
Each valve in the first set of three, controls one of
the hopper gates.
- Pull valve to close a gate.
- Push valve to open the same gate.
b. Swivel Folding Conveyor:
- Pull valve to swivel the conveyor left.
- Push the valve, to swing it right.
c. Raise/Lower Folding Conveyor:
- Pull this valve to lower the conveyor.
- Push valve to raise it.
d. Unfold/Fold Conveyor:
- Pull the valve to fold the conveyor.
- Push valve to unfold it.
e. Conveyor Motors:
- Pull the valve to start both conveyor belts.
- Push it to stop the conveyors.
Note:
Both conveyors are controlled with one valve.
They have a pre-set speed difference,
ensuring that the Folding Conveyor will
not become plugged from overfeeding.
f. Oil Flow Regulator:
This lever to adjusts the flow of hydraulic oil to the
conveyor motors. Adjust in small increments.
- Turn the lever horizontal to run the conveyor at
full speed.
- Return lever to vertical position to stop the flow
of oil.
Fig 4 - Valves Bank Decal
Fig 5 - Gate and Conveyor Positioning Hydraulic Valves
Fig 6 - Conveyor Motor Hydraulic Valve and Oil Regulator
Fig 7 - Oil Flow Regulator
a
b
c
d
e
f
36-1800-0002