CONVEY-ALL 1685-SP, Руководство оператора

Страница: 31 / 64

Operator’s Manual: 1600-SP Series Conveyor
Revised 06.2019 3-13
3.4 SWING-OUT REMOTE CONTROL
(OPTIONAL)
For the swing-out’s movements, there is an optional
remote control package.
Fig 43 - Remove control table on the swing-out
Fig 44 - Green, manual over-ride switch
Fig 45 - Hydraulic valves
Fig 46 - Relief valve
a
b
c
d
Manual Over-Ride Switch:
The large, green button in front of the valve table is
the over-ride switch. See Figure 41
To control the swing-out manually, press the over-
ride switch (Note: there is now pressure shown in the
gauge). Press the switch, and the appropriate valve
button at the same time.
Hydraulic Valves:
a. This manual valve operates the winch which
raises/lowers the swing-out.
It has a gauge to monitor the pressure in the
circuit.
b. This remote function raises/lowers the hopper,
moving the mover kit wheels on the swing-out.
- Remotely, use the buttons on the handset.
- Manually press the over-ride switch, together
with the button on the front or back of the
upper blue valve.
c. The second remote function drives the mover kit
wheels forward or reverse.
- Remotely, use the buttons on the handset.
- Manually press the over-ride switch together
with the button on the front or back of the
lower blue valve.
d. The manual valve on the far right, operates the
conveyor belt.
The belt on the swing-out and the main conveyor
belt are timed correctly so the swing-out will not
overfeed the second.
Relief Valve:
This is a relief valve for the mover kit. It has been
preset by the factory.
DO NOT ADJUST.