8-5
Assembly Manual: Undercarriage Installation
Revised 12.2019
Fig 255 - 3/4 Inch hydraulic hoses
8.2 HYDRAULICS AND ELECTRICAL
Note:
Refer to the hydraulic schematics
for fittings and hose placement.
18. Unroll the two 3/4 x 152 inch (12’-8”) hoses
from on the undercarriage.
IMPORTANT:
Be sure the hoses will not be
pinched under the cradle,
or rub against the wheel.
19. Finish clamping the two hoses along the
undercarriage arms.
Note:
Where possible, use existing screws
holding windguards.
20. Add a clamp block on top of the windguard,
fasten it to the undercarriage saddle.
21. Attach the first hose (a) to the outside port
on the hydraulic motor.
22. Attach the second hose (b) to the inside port
on the motor.
Fig 256 - Valve Drawing
152
152
a
b
152
a
152
b
Fig 257 - Clamp hoses
Fig 258 - Hydraulic motor hoses
