Connect up to 10 source devices to the HDMI ports using
appropriate quality HDMI cables. Input source devices include
Blu-ray players, set-top boxes, game systems and so on. These
inputs are DVI-D compliant (with the use of DVI to HDMI adapters
or cables). Attach IR blasters to the IR Out ports to transmit the
IR signals received from connected HDBaseT Receivers. The IR
signal routing follows the HDMI signal routing.
Note:
The use of “Premium High Speed HDMI” cables is highly
recommended.
2.
CAT5e/6 OUT & IR IN A~H:
Connect the Cat.5e/6 outputs via an appropriate cable to the input
ports of compatible HDBaseT receivers for HDMI audio/video and
IR/RS-232 control signal transmission. In order for an IR signal to
be transmitted along with the HDMI signal an IR extender must be
connected to the associated IR In port. IR signals coming back
from the connected HDBaseT receiver can be used to control the
matrix remotely and will also be broadcast from IR blasters
connected to the appropriate IR Out/All IR Out ports.
Note:
4K signals with HDR (High Dynamic Range) or Deep Color
are supported by the 2 HDMI output ports, however they are not
supported by the HDBaseT outputs due to bandwidth limitations.
If your HDR source needs to be output over the HDBaseT outputs
please remember to disable the HDR support on your source
device or use a non-HDR supporting EDID.
3.
IR IN (ALL):
Connect an IR extender to this port for IR signal reception. All IR
signals received will be broadcast by all IR blasters connected to
the matrix or connected HDBaseT receivers. Please ensure that
the remote being used is within direct line-of-sight of the IR
extender.
4.
IR OUT (ALL):
Connect an IR Blaster to this port to broadcast IR signals. All IR
signals received by any IR extenders connected to the matrix or
HDBaseT receivers will be broadcast. Please place the IR Blaster in
direct line-of-sight of the equipment to be controlled.
5.
HDMI OUT I & J:
Connect up to 2 HDMI displays using these HDMI output ports.
These two HDMI ports can be either independent high bandwidth
(18Gbps) outputs, or they can be configured to mirror two of the
HDBaseT outputs for local monitoring or recording purposes.
Note:
4K signals with HDR (High Dynamic Range) or Deep Color
are supported by the 2 HDMI output ports, however they are not
supported by the HDBaseT outputs due to bandwidth limitations.
If your HDR source needs to be output over the HDBaseT outputs
please remember to disable the HDR support on your source
device or use a non-HDR supporting EDID.
Содержание 15425
Страница 1: ...10x10 HDMI 6G HDBaseT Matrix with 48v PoH 15425 Operation Manual ...
Страница 47: ......