firmware, please navigate via the front panel menu to 5-Firmware
2-Update YES to begin the firmware update.
→
→
14.
MAIN 24V & POH 24V:
Plug one of the 24V power supplies (included in the package) into
the port marked “MAIN 24V” to power the matrix unit. If you wish
to connect PoH powered HDBaseT receivers to the matrix, please
plug the second 24V power supply into the
“
POH 24V” port. This
will allow the matrix to provide 48v PoH to all connected HDBaseT
receivers.
Side Panel
1.
FAN VENT:
These are air ventilation areas. DO NOT block these areas or cover
them with any objects. Please allow adequate space around the
unit for air circulation.
Remote Control
1.
POWER:
Press to power the unit on or place it into stand-by mode.
2.
LOCK:
Press to lock/unlock the front panel of the matrix unit.
3.
MUTE:
Mutes Zone Audio outputs. HDBaseT audio can only be muted when an
independent, non-HDMI, audio source has been routed to the output.
4.
IN 1~10, OUT A~J & PATTERN:
[Local matrix control]: When controlling the unit directly. Input selection from
1~10 plus test patterns (pattern button) and output selection from A~J (refer
to section 6.1).
[Zone A/V Pairing]: When controlling the unit via an HDBaseT receiver in a
remote location.
Pressing buttons 1~10 will switch to the A/V source assigned to the number
depending on your current zone. These assignments are configured via the
WebGUI (refer to
Zone A/V Pairing
in the
WebGUI control
section in this
manual).
5.
MENU/CANCEL:
Содержание 15425
Страница 1: ...10x10 HDMI 6G HDBaseT Matrix with 48v PoH 15425 Operation Manual ...
Страница 47: ......