HDBT_Out A+C+E VideoSrc=HDMI_In 2, AudioSrc=CoaxIn 2 & B+D Mute
& F VideoSrc=HDMI_In 1, AudioSrc=HDMI_In 1
•
Complex Multi-Slot/Parameter Command Format (ZoneAvPair)
The ZoneAvPair command can also control multiple slots with multiple
parameter groupings however the syntax is slightly different. Each
command can only affect a single port at a time. Each additional set
of slots/parameters are separated by the “&” character.
ZoneAvPair HDBT_Out {Port} Slot {Slot1}+{Slot2}+{Etc.}
{Param1=Value}, {Param2=Value} & Slot {Slot1}+{Slot2}+{Etc.}
{Param1=Value}, {Param2=Value} & Etc.
Example:
ZoneAvPair HDBT_Out B Slot 1 VideoSrc=HDMI_In 2, AudioSrc=CoaxIn
1 & Slot 2+3+4 VideoSrc=HDMI_In 2, AudioSrc=AnalogIn 1 & Slot 5+6
VideoSrc=HDMI_In 1, AudioSrc=HDMI_In 1 & Slot 1 Load
6.8.2 Real World Command Use
•
Zone A/V Pairing Mode Command Example
The easiest way to use the matrix for simple HDMI switching while still
allowing for individually tailored zone audio is to use the Zone A/V
Pairing setting within the WebGUI.
This is a configured and saved setting allowing each HDMI input to
be paired with different audio inputs, depending on the zone it is
being output to, for easy selection from a remote within that zone. For
example, certain zones might not be able to handle surround sound,
so you can pair the video in that zone with stereo inputs. Please review
to
Zone A/V Pairing
section of this manual for details of Zone A/V Pairing
configuration.
Command
Description
ZoneAvPair HDBT_Out A Slot 1 Load
Load the 1st A/V pairing for
HDBaseT Output A’s zone
• Optical Audio Return (OAR) Command Example
If you are also using the Zone Audio outputs (Stereo Zones) for any
zone we recommend using the Optical Audio Return (OAR) function
to set the Zone Audio output to always play the audio coming from
the TV itself. In this way the end user can freely switch between the
matrix input on the TV and the internal tuner/smart functions of the TV
and always be guaranteed audio (remember to set the TV’s optical
output to LPCM 2.0).
This command only needs to be resent after an audio only source has
been selected for that individual Zone Audio output. Commonly a
control system would have a “TV” button in the audio source selection
area along with your other audio sources.
Содержание 15425
Страница 1: ...10x10 HDMI 6G HDBaseT Matrix with 48v PoH 15425 Operation Manual ...
Страница 47: ......