background image

WebRelay Users Manual

      

Appendix F: Warranty

This Xytronix Research & Design, Inc. product is warrantied against defects in material and 
workmanship for a period of five years from the date of shipment. During the warranty period, Xytronix 
Research & Design, Inc. will, at its option, either repair or replace products that prove to be defective. 
This warranty is extended to the original purchaser of the equipment only.

For warranty service or repair, customer must contact Xytronix Research & Design, Inc. technical 
support (

[email protected]

) and obtain a Return Authorization number (RA#). Before issuing 

an RA#, a support technician will work with customer to try to resolve the issue without returning the 
product. If technician determines that product must be returned for service an RA# will be issued. Next, 
the product must be properly packaged and returned to Xytronix Research & Design, Inc. with the RA# 
clearly marked on the package. The purchaser shall prepay all charges for shipping to Xytronix 
Research & Design, Inc. For warranty repairs of products less than one year old, Xytronix Research & 
Design, Inc. will pay the shipping charges to return the product to the purchaser as long as the product is
shipped within the continental United States. If the product is shipped outside of the continental United 
States or the product was shipped more than one year earlier, the purchaser shall pay all shipping 
charges both ways.

Limitation

The foregoing warranty shall not apply to defects or damage resulting from improper use or misuse, 
unauthorized repair, tampering, modification, improper connection, or operation outside the 
electrical/environmental specifications for the product. Further, the warranty does not cover damage 
from Acts of God, such as lightning, fire, flood, hurricanes and tornadoes. This warranty does not cover 
damage to property, equipment, direct, indirect, consequential, or incidental damage (including damage 
for loss of business profit, business interruption, loss of data, and the like) arising out of the use or 
misuse of this product.

UNDER NO CIRCUMSTANCES WILL THE LIABILITY OF XYTRONIX RESEARCH & DESIGN, INC. TO
THE PURCHASER OR ANY OTHER PARTY EXCEED THE ORIGINAL PURCHASE PRICE OF THE 
PRODUCT, REGARDLESS OF THE FORM OF THE CLAIM. No other warranty is expressed or implied.
Xytronix Research & Design, Inc. specifically disclaims the implied warranties or merchantability and 
fitness for a particular purpose. Some jurisdictions may not allow the exclusion of limitation of liability for 
consequential or incidental damage.

Xytronix Research & Design, Inc.

Page 79

Содержание WebRelay X-WR-1R12-1I-E


















































































Отзывы: