background image

1

Description

IEC 62061

SILCL

Safety relay for emergency stop, safety door and 
light grid monitoring with adjustable delay time

PSR-...-24DC/ESD/5X1/1X2/300

© PHOENIX CONTACT

Data sheet

The

PSR-...-24DC/ESD/5X1/1X2/300

 safety relay can be 

used for emergency stop, safety door and light grid monitor-
ing in safety circuits according to EN

60204-1.

Depending on the external wiring, up to category 

4, PL

e ac-

cording to EN

ISO

13849-1 or SILCL

3 according to 

EN

62061 can be achieved for the undelayed contacts and 

category

3, PL

d according to EN

ISO

13849-1 or SILCL

2

can be achieved for the dropout delayed contacts.

Control is via a single channel or two channels, either with 
automatic or manual start circuit.

A connected reset button is monitored.

The safety relay is equipped with three enabling current 
paths and one signaling current path that drop out without 
delay according to stop category

0.

Two other enabling current paths drop out with a delay in 
compliance with stop category 1.

The delay time is set in 24

increments via the rotary switch 

and the DIP switch in the upper housing part.

Features

Emergency stop, safety door and light grid monitoring

Undelayed contacts suitable up to category

4, PL

e

(EN

ISO

13849-1), SILCL

3 (EN

62061)

Dropout delayed contacts suitable up to category 3, 
PL

d (EN

ISO 13849-1), SILCL

2 (EN

62061)

Single or two channel operation

Automatic or manual start circuit

3 undelayed enabling current paths

2 delayed enabling current paths

1 undelayed signaling current path

Adjustable delay time (0.2

s

...

300

s, 24

increments)

Option of screw or spring-cage terminal blocks for plug-
in

WARNING: Risk of electric shock

Observe the safety instructions in the corresponding section!

Make sure you always use the latest documentation.
It can be downloaded from the product at 

phoenixcontact.net/products

.

This data sheet is valid for all products listed on the following pages.

102104_en_03

2015-05-11

www.phoenixpowersupply.co.uk

Содержание 2981428











Отзывы: