WebRelay Users Manual
Appendix A: Restoring Factory Default Settings
In the event that the IP address or passwords are forgotten, the WebRelay may be restored to its
original factory default settings.
1.
Remove the DC power from the unit.
2.
Use a thin, non-conductive object (such as a toothpick) to press and hold the small button located
on the bottom of the unit. When the object is inserted, a tactile feedback can be felt as the button is
depressed.
CAUTION: Do not use metal objects for this function
3.
While depressing the button, apply power and wait for about 10 seconds before releasing the button.
All settings will be back to the original factory defaults.
4.
Refer to
Section 2.5: Establishing Communications for Setup
to begin reconfiguration of the device.
Xytronix Research & Design, Inc.
Page 69
