12
7. Warranty:
Warrantor: Dealer, Distributor, Retailer, Manufacturer
Warranty and Remedy:
We believe this is a very fine product. Although we take extreme pride in offering a product that
will function properly, we cannot guarantee that there will never be a defective unit or that a unit
will function on all the thousands of phone lines and communication equipment in existence.
For this reason, it must be clear that the Warrantors are not insuring your premises or
guaranteeing that there will not be damage to your person or property if you use this Product. If
you are not comfortable with our Limited Warranty, or completely satisfied with the Product, we
encourage you to return the unused Product for a full refund within 30 days of purchase. Thank
you for your understanding.
One Year Limited Warranty – Control Products, Inc. warrants its products to be free from
defects in material and workmanship under normal use for one year, and is not responsible for
consequential damages or installation costs of any nature. In the event that the Product does
not conform to this Warranty at any time during the period of one year from original purchase
date, Warrantor will repair the defect and return it to you at no charge. IMPORTANT: The
Warranty is limited to replacement of the Product ONLY. Secondly, because every phone
line differs, we strongly encourage you to fully test this Product in its actual application. This
should include a full test, involving the Product actually dialing to its designated locations and
someone verifying the proper response.
This Warranty shall terminate and be of no further effect at the time the Product is 1) damaged
by extraneous causes such as fire, water, lightening, etc., or not maintained as reasonable and
necessary; 2) modified; 3) improperly installed; 4) repaired by someone other than the
Warrantor; 5) used in a manner or purpose for which the Product was not intended.
WARRANTORS’ OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIR OR
REPLACEMENT OF THE PRODUCT ONLY. THIS WARRANTY DOES NOT COVER
PAYMENT OR PROVIDE FOR THE REIMBURSEMENT OF PAYMENT FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
It must be clear that the Warrantors are not insuring your premises or guaranteeing that there
will not be loss or damage to your person or property if you use this Product. The Warrantors
shall not be liable under any circumstances for damage or losses to your person or property or
some other person or that person’s property by reason of the sale or use of this Product, or its
failure to operate in the manner in which it is designed. The Warrantors’ liability, if any, shall be
limited to the original cost of the Product only. Use of this product is at your own risk.
Procedures for Obtaining Performance for Warranty:
In the event that the Product does not conform to this Warranty, the Product should be shipped
or delivered freight prepaid to Warrantor with evidence of original purchase. If in any way you
are not comfortable with this product or its Limited Warranty, we encourage you to return it
unused within 30 days of original purchase date with evidence of the purchase date.
To return your miniAlarm™ Deluxe to Control Products, Inc.:
All products being returned to Control Products must have a valid Returned Goods
Authorization Number (RGA #) from Control Products, Inc., regardless of why the product is
being returned. Warranty returns will be honored only with an RGA #. Ship warranty returned
products prepaid to Control Products, Inc. 1724 Lake Drive West, Chanhassen, MN 55317.
Control Products, Inc. will, at its option, either repair or replace the product free of charge and
return the repaired unit or replacement unit at the lowest cost shipping prepaid. Products
returned for credit are subject to a 15% restocking charge. Returns resulting from errors by the
seller are not subject to this charge. All returns must include evidence of original purchase,
showing purchase date. The RGA # should be clearly marked on the outside of the package
containing the product.
To request an RGA #, call Control Products, Inc. at 952-448-2217 and ask for Customer
Service. Failure to have an RGA # may result in lost product or significant delays in handling
your return. Products without an RGA # clearly marked on the outside of the package are not
the responsibility of Control Products, Inc.
8. FCC Statement:
This equipment complies with Part 68 of the FCC rules. The FCC Part 68 Label is located on
the rear of the enclosure. This label contains the FCC Registration Number for this equipment.
If requested, this information must be provided to your telephone company.
The REN is useful to determine the quantity of devices you can connect to your telephone line
and still have the devices ring when your telephone number is called. In most, but not all areas,
the sum of the RENs of all devices connected to one line should not exceed five (5.0). To be
certain of the number of devices you may connect to your line, as determined by the REN, you
should contact your local telephone company to determine the maximum REN for your calling
area.
Using standard modular telephone jacks, type RJ11C, should make connection to the
telephone network. The RJ11C plug and/or jacks used must comply with FCC Part 68 rules. If
trouble is experienced with this unit, please contact customer service at the address and phone
listed below. DO NOT DISASSEMBLE THIS EQUIPMENT. It does not contain any user
serviceable components. If the equipment is causing harm to the network, the Telephone
Company may request that you disconnect this equipment from the telephone network until the
problem is resolved.
These devices comply with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) these devices may not cause harmful interference, and (2) these devices must
accept any interference received, including interference that may cause undesired operations.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designated to provide reasonable
protection harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that the interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
on and off the equipment, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
FCC ID: I55HSS202RUS
FCC Reg:
6ACTAI-24559-AL-E
FCC ID: I55RCU202R
USOC Jack:
RJ11C
AC REN: .07b
MA-D is made in Taiwan; Manual printed in USA
