10
4.6 Recording Voice Message:
When using the Voice feature of the MA-D, you will need to record
the address of where the alarm is coming from. To do this enter
your pass code (0000) then the “#” key then the “*” key, the
program LED will flash during recording. Now speak into the right
side of the keypad. You will want to say the owner’s name and the
address of the alarm. The system will record 24 seconds of your
message.
Formula: Pass Code (0000) + # + * Then speak into the unit.
4.7 Playback of the Voice Message:
Once you have recorded your message you can listen to it by
entering your pass code (0000) then “#” key then “0” key. You will
hear the message you recorded.
Formula: Pass Code (0000) + # + 0
4.8 Remote Controller:
The remote control has three buttons that allows you to switch the
control unit from stand by to AWAY or HOME modes and it allows
you to Disarm the Control Unit and initiate a HELP alarm and
initiate the Control Unit to call out to your programmed numbers.
We have added a delay to the buttons of the remote. So you will
need to hold the buttons down for them to activate the controller.
We have also added the ability to switch from away to home and
back to away. By pressing the arm button once will put the system
into the armed mode and you will hear two beeps. Pressing the arm
button again will put the system into the home mode and you will
hear three beeps. Pressing the Help button will cause the controller
to send an audible panic alarm telling the Control Unit to call your
programmed phone number list and play the alarm message.
A. Arming with Remote:
Press once and hear Two Beeps = Away Mode
Press again and hear Three Beeps = Home Mode
B. Disarming with Remote:
Press and hold the “Off” button to disarm the MA-D Control Unit.
Multiple Beeps when disarming = System Violation
Either something is wrong with the system or there has been a
violation of system and may have been tripped by an intruder or
some other means.
Note: If you notice the range of the transmitter is shorter, or the LED
light isn't as bright, the battery should be replaced. Unscrew
the backside of the cover to replace the 12V, A23 size battery
(included).
5. Programming Phone Numbers:
Your MA-D alarm has the ability to hold up to four different phone
numbers. Each phone number could report in a different mode, either
to a voice phone (home, office, mobile, neighbor, relative or friend),
or a numeric pager. Each phone number can be up to 24 digits in
length.
NOTE: Most municipalities have ordinances against having
security systems dial the police, fire, or other emergency numbers.
It is highly recommended you do not program 911 or any other
emergency number into your MA-D Security System.
