11
To program the phone numbers you need to enter your pass code
(0000) and then push the # key and then the position for the phone
number (1 through 4). See chart below. Then you select the type of
phone number this is – either a voice phone number or a pager.
Follow this with the actual phone number to dial. If dialing long
distance, make sure you add the “1” if necessary and the area code. It
should be entered exactly as if you were dialing with a regular phone.
Then press the # key when done. Repeat for phone numbers 2
through 4.
When the MA-D dials out during an alarm, it will attempt to call all
four numbers in the sequence of their position number. The MA-D
will call the number in position 1 first and follow the sequence
through position 4.
N = Phone Number Position Chart
1 = Phone Number 1
2 = Phone Number 2
3 = Phone Number 3
4 = Phone Number 4
M = Phone Number Type
1 = Don’t Use
2 = Voice Phone (home, cell, office, neighbor or relative)
3 = Pager
Formula for entering a phone number:
Pass Code (0000) + # + N + M + Phone #
Formula for deleting a phone number:
Pass Code (0000) + # + N + M + #
NOTE:
1.
For phone systems where you need a delay before you enter a
set of numbers, you can add a 3 second delay by pressing the
“*” key. Each “*” entered is considered one of your 24 digits
allowed per phone number.
2.
When programming the pager phone number, you may need to
enter several 3 second delays using the “*” key and then
follow it up with additional digits you wish to appear on the
numeric pager display number.
3.
When the unit is in alarm and dialing out to your programmed
phone numbers, it will attempt to dial all four numbers,
regardless if there are numbers programmed in other positions
or not. This means the Control Unit may make some clicks
and noises during call-out, even though you only have one or
two numbers programmed in the Control Unit.
6. Contacting Us & Technical Support:
Control Products prides itself on making quality products. If you have
comments or suggestions on making our products better, feel free to contact
us:
Control Products, Inc.
1724 Lake Drive West
Chanhassen, MN 55317
952-448-2217
Fax: 952-448-1606
Consumer Products Web Site: www.protectingyourhome.com
Corporate Web Site: www.controlproductsinc.com
For Technical Support:
If you need technical support:
Call toll-free: 1-800-947-9098
Email:
On the web:
www.protectyourhome.com
Model Number Information:
The model number and description of your unit is:
MA-D
Deluxe MiniAlarm
When calling or writing for customer support or service, it is a good idea to
have the DATE CODE/MO# from the back of your unit:
Write it down here for easy reference: _______________________
