Control 4 C4-TSM10-G-B, Руководство по установке

Страница: 19 / 40

15
C H A P T E R
2
Setting Up Wireless Touch
Screen
Use this chapter as a guide to setting up the Control4
Wireless Touch Screen in your Control4
®
home
automation system.
Topics covered here include:
`
““Requirements”” on page 15
`
““Install Battery Components”” on page 16
`
““Connect to Power Supply”” on page 18
`
““Calibrate the Touch Screen”” on page 19
`
““Set Network Settings”” on page 19
Requirements
The Wireless Touch Screen - 10.5 requirements are:
‰
A network
WiFi (802.11b/g)
wireless access point
(WAP) already configured to communicate with
a Control4 controller, (such as Media
Controller). See the control4.com web site for
recommended WAP models.
‰
Obtain the following wireless network
information:
‰
SSID —— The Service Set Indentifier of the WiFi
WAP.
‰
WEP Key (if enabled) ——The Wired Equivalent
Privacy key, which may have been enabled for
WiFi Network Security.
‰
IP Addressing Requirements —— The default
setting is DHCP (with dynamic addresses).
When required to use a static IP address,
provide a network IP address for this device.