Gsm Advanced Manual - 42
42
42
42
16.3 Delete a scheduled operation
Although this operation can be easily performed by means of GsmSuite, any supervisor can
delete a scheduled activity through local console once access is granted using AT#KOPEN
entering an AT command.
The same command could be issued like SMS (without any other command) by supervisors:
AT+WAGD=mode,location
16.3.1 mode
Select between specific location and all locations:
0
all locations
1
specified location only
16.3.2 location
The location to be removed when mode selection is “specified location only”.
16.3.3 Example
AT+WAGD=0
Delete all scheduled operations
AT+WAGD=1,1
Delete 1
ST
location only.
16.3.4 Confirmation
Once scheduled operation has been successfully removed, device will return:
OK
17. MODEM OPERATION
To operate the unit like a pure modem, open the local com port and send the command:
WOPEN=5
this will suspend the normal activity of the unit, any incoming command will be discarded and
local inputs ignored.
Local com port can receive AT commands and data stream like any GSM modem.
To recover the normal operation send the command:
WOPENRES
Removing power supply while in suspended modem the unit will restart the normal operation at
further power on.
