Gsm Advanced Manual - 23
23
23
23
10. DEVICE INFO
Although not mandatory, some information about the device and its application environment can
improve the readability of message sent by the unit and activate some specific features.
10.1 Edit Device info
Specific information about device environment are stored at index 300, group 3 and can be
written and/or modified by means of GsmSuite programming software. Such information can be
stored or modified also by any supervisor issuing an SMS:
+3,300,TEL,INFO,,,,,EMAIL,TEXT
10.1.1 TEL
It’s the telephone number of the device itself. Number should be stored in international format
(including Country code). Up to 20 characters available.
When this telephone number is provided, the unit will be able to perform an auto
synchronization of internal real time clock (3 attempts after power-on if an invalid clock is found).
This phone number will be used also for scheduled anti-blacklist calls.
10.1.2 INFO
A short text to identify the device application. Up to 14 characters available.
This text will be reported in any status SMS, identifying the sender.
10.1.3 EMAIL
The optional Email address assigned to the device itself. Up to 40 characters available.
Any Email sent out by GPRS devices are sent also to this Email address.
Usually this is the mailbox assigned by network operator to SIM card number and will be
accessible from any Internet connection, providing correct user ID and password.
10.1.4 INFO
Detailed information about the application controlled by this device.
Up to 56 characters available.
This text will be reported in any status SMS, identifying the sender.
10.1.5 Example
+3,300,+4468795412,Building 1,,,,,,Living room Apt. 14
10.1.6 Confirmation
Once Phonebook edit has been successfully done, device will send back an SMS specifying
assigned index, name and 7 markers to specify which fields are defined (
*
) and which don’t (
-
):
300,Building 1,**----*
