Gsm Advanced Manual - 18
18
18
18
7. SUPERVISORS
Some operations are reserved to supervisors.
System can work also without any supervisor, of course nobody can issue configuration SMS
nor edit Phonebook in remote mode.
To operate both like user and supervisor store the entry in both groups.
7.1 First Supervisor
To store the first supervisors without using GsmSuite, anyone can send the following SMS:
#XXXX.NAME.EMAIL*
The telephone number of SMS sender is automatically collected from the incoming call
presentation (thus the telephone number must be kept visible) and will be assumed as the first
supervisor’s telephone number.
First supervisor will be stored at position 401.
7.1.1 XXXX
The system PIN, the default number is 0000 and can be later modified by any supervisor.
7.1.2 NAME
The name of the first supervisor to be stored. Up to 14 characters available.
Do not use dot characters within name field.
7.1.3 EMAIL
The optional Email address of the supervisor. Up to 40 characters available.
GPRS devices can send some Email messages to specified address.
7.1.4 Example
#0000.Harry [email protected]*
Store Harry Potter like supervisor (group 7) at first available position (401).
SMS must begin with hash character [
#
] and terminated with star character [
*
].
The dot [
.
] character is the separator between fields and must not be used inside NAME field.
It’s possible to use dot characters inside Email field.
Both
?
and
@
are allowed like domain specification character.
To avoid mistakes the supervisor’s telephone number is taken directly from the caller identifier
(the number must be kept visible).
To store the first supervisor without specifying the Email address send:
#0000.Harry Potter*
7.1.5 Confirmation
Once First supervisor has been successfully stored, device will send back an SMS:
332: Supervisor succesfully added
If a supervisor already exist, it will be impossible to store the incoming one. The unit will send
back an error SMS:
331: Supervisor group isn't empty