GETTING TO KNOW YOUR
CONTOUR P12 PUMP
EARTH TERMINAL
PUMP TERMINALS
By swapping the wires around the pump will
change direction. Use the ‘Test’ button
(in the Control Box) to set the
direction to match the inflow and outflow.
Once the inlet and outlet direction has been
established this
should not
be changed.
The pump speed can also be adjusted (in the
Control Box) to match the shower flow rate.
WALL PLATE
Quick release wall bracket allows for easy
installation.
The pump housing clips onto the wall plate
for easy fitting.
INLET & OUTLET CONNECTORS
Elongated inlet & outlet connectors ensure an
airtight fit.
Ensure all pipework is tightened securely to
avoid any air being sucked in whilst the pump
is operating.
Once the inlet and outlet direction has been
established this
should not
be changed.
Technical Helpline: 0845 402 9924
•
•
•
•
Pump Housing
Dimensions
A = 190mm
B = 210mm
C = 330mm
The housing clips onto the wall plate.
Manufactured from ABS.
The fl ow switch & control box covers
are optional accessories,
see above.
Pump Only
Dimensions
(Housing not fi tted)
A = 180mm
B = 205mm
C = 270mm
B
C
A
ENSURE
YOU USE
22mm Flexible
Pipe supplied.
FOR SHOWER TRAYS - Kit A
• UPSW3 is only 30mm in depth
• 22mm outlet
• Chrome top fl ange
STANDARD KIT REF: 05PP01A
LINK PUMP ONLY: 05PP01A-L
FOR FLOOR FORMERS - Kit B
• Use with an Eagle Two shower tray or Prinia shower tray
• UPSW-4 is only 32mm in depth
• 22mm outlet
• Chrome top fl ange
STANDARD KIT REF: 05PP01D
LINK PUMP ONLY: 05PP01D-L
FOR SHOWER TRAYS - Kit D
• USG1-WH is only 45mm in depth
• 22mm outlet
• Manufactured in white ABS
• Withstands wheelchair loadings
STANDARD KIT REF: 05PP01B
LINK PUMP ONLY: 05PP01B-L
FOR TOP ACCESS SHOWER TRAYS - PUMP ONLY
Pump only should be used with a Gannet top access
shower tray.
STANDARD KIT REF: 05PP01
LINK PUMP ONLY: 05PP01-L
ADDITIONAL ITEMS
Additional fl owswitch for
use with a mixer shower.
Ref: 05PP11
Optional Control Box
Ref: 05PP16
Optional Flow Switch cover
Ref: 05PP17
•
STANDARD
kits include 1 x flowswitch and are meant for typical
electric shower installations.
•
LINK
kits have no flowswitch and are meant to be wired directly to
a suitable link enabled electric shower.
