manualshive.com logo in svg

Continental Refrigerator RightViu, Инструкция по монтажу

Поделиться
Скачать
Continental Refrigerator RightViu Скачать руководство пользователя страница 6

6

Symbols used in this manual

Safety information in this manual is marked using symbols. Safety information is introduced by a signal word that expresses the severity of 

the hazard involved.

DANGER!

This combination of symbol and signal word indicates a directly hazardous 
situation that will result in severe injury or death if it is not avoided.

WARNING!

This combination of symbol and signal word indicates a potentially hazardous 
situation that can result in severe injury or death or severe injuries if it is not 
avoided.

CAUTION!

This combination of symbol and signal word indicates a potentially hazardous 
situation that can result in minor or slight injuries if it is not avoided.

NOTE!

This combination of symbol and signal word indicates a potentially hazardous 
situation that can result in property and environmental damage if it is not 
avoided.

SAFETY

Содержание RightViu





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды