manualshive.com logo in svg

Continental Refrigerator RightViu, Инструкция по монтажу

Поделиться
Скачать
Continental Refrigerator RightViu Скачать руководство пользователя страница 35

35

DANGER!

Mortal danger due to modification or manipulation of RightViu, 
which can have a negative influence on safety. This may result in 
death, severe or minor injuries (personal injury) to the operator or 
third parties, property and environmental damages.

The volume of the warning signal cannot 

be adjusted. The brightness of the indicator 

light cannot be adjusted.

There are different installation options, due to the large number of 

different possible vehicles.

Choose the installation position as follows:

At least 30° to the right of the driver’s line of sight. The box, buzzer 

and indicator light may not interfere with the driver’s view or distract 

the driver. 

We recommend attaching the signal box (11) to the A column on the 

passenger side, at the height of the side mirror. 

A self-adhesive hook and loop strap is included in the scope of 

delivery to install the signal box (11).

NOTE

The volume of audio sources such as 

e.g. radio must be reduced to such an 

extent that the warning signal can still 

be heard easily.

MOUNT THE SIGNAL BOX

Содержание RightViu





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды