English
- 52 -
To Connect to a wireless LAN, you should
perform the following steps:
1.
Ensure that Nero Media Home software is
installed to your PC (for DLNA function).
2.
To configure your wireless settings please refer
to
the Network settings section in this manual.
Broadband
ISP
connection
Wireless LAN
adaptor
USB inputs
rear left side
of the TV
• A Wireless-N router (IEEE 802.11a/b/g/n) with
simultaneous 2.4 and 5 GHz bands is designed
to increase bandwidth. These are optimized for
smoother and faster HD video streaming, file
transfers and wireless gaming.
• Use a LAN connection for quicker file sharing
between other devices like computers.
• The frequency and channel differ depending on the
area.
• The transmission speed differs depending on the
distance and number of obstructions between the
transmission products, the configuration of these
products, the radio wave conditions, the line traffic
and the products that you use. The transmission
may also be cut off or may get disconnected
depending on the radio wave conditions, DECT
phones or any other WiFi 11b appliances. The
standard values of the transmission speed are
the theoretical maximum values for the wireless
standards. They are not the actual speeds of data
transmission.
• The location where the transmission is most effective
differs depending on the usage environment.
• The Wireless feature of the TV supports 802.11 a,b,g
& n type modems. It is highly recommended that you
should use the IEEE 802.11n communication protocol
in order to avoid any possible problems while watching
videos.
• You must change your modem’s SSID when there are
any other modems around with the same SSID. You
can encounter connection problems otherwise. Use
a wired connection if you experience problems with a
wireless connection.
Configuring Wireless Device Settings
Open the Network Settings menu and select
Network
Type
as
Wireless Device
to start connection process.
Press the
YELLOW
button to scan the wireless
networks. A list of available networks will be displayed.
Please select your desired network from the list.
Note:
If the modem supports N mode, you should set
N mode settings.
If the selected network is protected with a password,
please enter the correct key by using the virtual
keyboard. You can use this keyboard via the
navigation
buttons
and the
OK
button on the remote control.
Wait until the IP address is shown on the screen.
This means that the connection is now established. To
disconnect from a wireless network press
OK
.
You can navigate between menu tabs by pressing left/
right buttons. The help bar on the bottom of the dialog
shows features that you may use. Press the
BLUE
button to check your internet connection speed. Press
the
GREEN
button to switch to advanced mode and
then press the
OK
button to edit settings.
You can check the signal strenght by using the network
settings menu for the wireless device mode.
Other Information
Configuration Status
: Displays Wi-Fi status as
connected or not connected.
IP Address
: Displays the current IP address.
Network Name
: Connected networks’ name will be
displayed.
Delete Saved Wi-Fi Profiles
Saved profiles will be deleted if you press the
RED
button while the wireless device selection OSD is on
the screen.
Connecting to your mobile Phone via WiFi
• If your mobile phone has WiFi feature, you can
connect your mobile phone to your TV by using a
WiFi connection via a router, in order to play content
from your phone. For this, your mobile phone must
have an appropriate sharing software.
• Connect to your router following the steps stated
above in the Wireless Connection section.
• Afterwards, engage your mobile phone with the router
and then activate the sharing software on your mobile
phone. Then, select files that you would like to share
with your TV.
• If the connection is established correctly, you should
now be able to access the shared files from your
mobile phone via the Media Browser of your TV.
• Enter the Media Browser menu and the playback
device selection OSD will be displayed. Select your
mobile phone and press the
OK
button to continue.
• A virtual remote controller application could
be available for download in your smartphone
application providers server. Not all smartphones
are supported by this application.
