Maintenance
7-4
Cleaning the Scan Area
On Scanners:
1.
Turn the scanner power off and disconnect the power plug.
2. Place your fingers in the insertion slot and flip open the scanning area lid.
3. The drive system automatically lifts up.
4. Grasp the white pressure-platen on its back edge braces. Tip up the back edge of the
pressure-platen and lift it out to expose the glass-plate underneath.
5. Clean the glass with a lint-free cloth and a mild, streak-free, glass cleaner. Dry the
glass completely using a separate clean, dry lint-free cloth like the one provided with
the maintenance kit.
6. On this scanner, the pressure-platen’s backside also serves as the white background.
Wipe the white backside of the pressure-platen and the transport rollers with a lint-free
cloth and a mild, streak-free, cleaner.
7. Dry the pressure-platen and rollers completely using separate clean, dry lint-free cloths.
8. Reinsert the pressure-platen. First place the pressure-platens front braces so they rest
on the front drive
axle.
9. Tip the platen backwards until the pressure-platen’s back braces rest on the backmost
drive axle.
10. Close the scanning area lid.
11. Clean also the scanner surface so dirt and dust are not dragged into the scan area with
the original.
12. Cover your scanner with the plastic dust cover when not in use.
Caution
: Make sure the scanner power is OFF when using the scanner dust cover.
To remove the pressure-platen
Grasp by the braces on the pressure-platen’s backside
edge.
Flip up the back edge and lift out the pressure-platen.
When you reinsert the pressure-platen: position so
the braces rest on the parallel drive axels.
Drive Axles
Cleaning – To access the scan area – remove the pressure-platen
Front brace.
Back brace.
Содержание GS67D
Страница 3: ......
