Contex GS67D Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 67

background image

Installation

3-10

3.6 Connection through the FireWire Interface

To connect through FireWire, you will need the FireWire cable that came with your scanner.
Your computer must be enabled for FireWire through a FireWire card and port.

Check your computer for FireWire

Many computers come with FireWire inputs. Follow these steps to check if FireWire is enabled
on your computer:

1. In Windows, Click Start, Settings, and then Control Panel.

2. Double-click the System icon.

3. Click the Device Manager tab.

If a FireWire host controller (IEEE) is listed, then FireWire is enabled on your computer. If you
do not see this device listed, you will need to install a FireWire card.

To install a FireWire card, shutdown your computer and install the card into an empty PCI slot.
See your computer’s user’s manual for installation of new hardware and the driver installation
information that came with your FireWire card.

Connect scanner to PC with Firewire cable

1.

Make sure you have installed WIDEsystem

on your PC before you connect the

scanner. Your scanner drivers are automatically installed with WIDEsystem and your
PC will then be fully prepared to detect and setup the newly connected scanner device.

2. Shut down (power off) your PC. Do not connect the scanner power cable or turn on the

scanner.

3. Locate the FireWire cable that came with your scanner.

4. Connect the PC end to the FireWire port on your computer

5. Connect the peripheral end to a FireWire connection socket on your scanner.

6. Connect the power cable to your scanner and turn the scanner on.

7. Turn on the PC. The OS will detect and setup the newly connected scanner device.

8. If

an

”Unknown device is found”

message appears after you plug in the cable, follow the

steps described below under

Unknown device is found message.

Note:

The extra FireWire connector is for daisy-chaining another device to your system and not

for interfacing with another PC.

“Unknown device is found” message

If your system has problems detecting the scanner, make sure your FireWire port is enabled
(see above). Make sure you have installed the WIDEsystem software from the CD that came
with your scanner or a newer WIDEsystem version. Make sure you have installed WIDEsystem

before

connecting the scanner. You should never attempt to step through device installation

dialogs before installing WIDEsystem. If you have done so, see the trouble shooting section for
instructions on reinstalling.
If your system still does not detect the device, disconnect the FireWire cable, unplug the power
to your scanner and turn off the computer. Wait a few minutes, reconnect the scanner, restart
the PC and turn on the scanner.

«
...
14
15
16
17
18
...
»

Содержание GS67D




































































Отзывы:

Нет отзывов

Похожие инструкции для GS67D

CanoScan LiDE 120

Бренд: Canon Страницы: 2

Бренд: Camlink Страницы: 2

Бренд: FDI MATELEC Страницы: 4

Бренд: i.safe MOBILE Страницы: 76

Бренд: Fujitsu Страницы: 36

ScanPartner 3091DC

Бренд: Fujitsu Страницы: 2

ScanPartner 3092DC

Бренд: Fujitsu Страницы: 2

ScanPartner 93GX

Бренд: Fujitsu Страницы: 2

Бренд: Fujitsu Страницы: 60

ScanPartner 93GX

Бренд: Fujitsu Страницы: 41

Бренд: Fujitsu Страницы: 32

ScanPartner 3091DC

Бренд: Fujitsu Страницы: 67

ScanPartner SP25

Бренд: Fujitsu Страницы: 164

ScanSnap S1300i

Бренд: Fujitsu Страницы: 439

Scan Snap S1300i

Бренд: Fujitsu Страницы: 490

ScanPartner FI-4110CU

Бренд: Fujitsu Страницы: 2

3060 - DR - Document Scanner

Бренд: Canon Страницы: 60

Бренд: Canon Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды