Scanner Operation - Panel and Indicators
4-11
Media Control
On Scanners:
Scanners with the Automatic Thickness Adjustment Control (ATAC) key
These scanner models support Automatic Thickness Adjustment Control for easy adjustment of the
pressure-platen level for scanning thick media. Thick media scanning will be described in detail later in this
manual.
For both thin and thick media, the Paper Ready LED lights up when the media is inserted into the original’s
insertion slot and correctly positioned. The media can then be moved into the start-scan position by
pressing the Paper Forward Key or through automatic loading. The Paper Ready LED will blink during
scanning.
How it looks on scanner…
What it means….
Paper Forward and Paper Reverse Keys
The Paper Forward Key moves the drawing into the start-scan
position for manual loading (see section on
Loading
).
If
Auto-Load
is applied, loading will occur automatically (without
pressing the key) when the original enters the insertion slot.
Pressing the
Paper Forward
Key
during scanning will stop the
scanning process and feed the original through the scanner while
the key is held down.
The Paper Reverse Key stops the current scanning process and
reverses the original. The original will be fed backwards through
the scanner while the key is held down.
When the scanner is in Automatic Thickness Adjustment Control
(ATAC) mode the paper forward and paper reverse keys become
“pressure-platen up” and “pressure-platen Down” keys (see below).
Paper Ready LED Green - Ready for Normal media
The Paper Ready LED lights green when normal thin media is
positioned correctly in the insertion slot and stays green when the
media is moved to the start-scan position.
From there, scanning can be controlled from the computer.
Содержание GS67D
Страница 3: ......
