PILOT-8
- 8-channel intelligent DMX controller
Page 5
English
2.1 - Description of the front panel
2.2 - Description of the rear panel
1
PROJECTOR SELECTOR
Allows you to select the projectors to control.
2
AUTO CHASE
Allows you to launch programs in step mode.
3
SOUND CHASE
Allows you to launch programs in music-sensitive
mode.
4
AUTO FADE
Allows you to launch programs in auto fade mode.
5
MANUAL CONTROL
Allows you to switch to manual mode
.
6
CHANNEL ASSIGNMENT
Assigns a DMX channel to each fader.
7
USB Port
Allows you to connect a small USB lamp (supplied)
8
PRESET COLORS
Groupe of 8 non-editable preset colours.
9
SAVED COLORS
Group of 6 buttons allowing you to save 24 colours. User
colours are saved across 4 banks of 6 colours.
10
Display
Indicates information about the console status. The
different displays and their meaning are available further
in this guide.
11
RECORD
Allows you to access the record mode for colours and
sequences.
12
INSERT/TAP
Allows you to insert step into sequences or define the
speed of sequences.
1
Power switch
2
Power input socket
DC9V-12V - 300mA minimum.
3
DMX output 1
3-pin female XLR socket:
1 = ground / 2 = negative signal / 3 = positive signal
4
DMX output 2
5-pin XLR socket:
1 = ground / 2 = negative signal / 3 = positive signal
/ 4 = not connected / 5 = not connected.
13
UP/DOWN Buttons
Allows you to select a bank, manually browse through
sequences, configure the sound sensitivity and adjust
the AUTO CHASE mode speed.
14
DELETE/CLEAR
Allows you to delete user colours or sequences and
clear the DMX output.
15
SAVED CHASES
Group of 8 user sequences.
16
Faders 1 to 6
Allows you to adjust the levels of channels 1 to 6.
17
Faders 7 to 8
Programmable faders allowing the user to assign
functions of its choice.
18
MANUAL/MUSIC/AUTO
Allows you to switch from manual, to music-sensitive or
automatic mode.
19
BLACK-OUT/REMOTE
Allows you to switch to black-out mode or use the
console via an optional remote control.
20
STROBOSCOPE
Allows you to activate the strobe function. The projectors
will start flashing white.
21
CHASE/STROBE SPEED
Allows you to adjust the sequences or strobe speed.
22
FADE SPEED
Allows you to adjust the fade speed, this speed is
determined by a percentage of the duration of each step
(configured with the CHASE SPEED button).
5
DMX output 3
RJ45 socket
.
1 = not connected / 2 = not connected / 3 = not
connected / 4 = not connected / 5 = not connected /
6 = positive signal / 7 = negative signal / 8 = ground
6
Socket for optional EASY-2 remote control
Stereo Jack 6.35 socket.
Caution: this socket is for the
optional EASY-2 remote control only.
Any other kind of signal might damage the internal
circuitry.
