PILOT-8
- 8-channel intelligent DMX controller
Page 13
English
3.12 - Overloading the output
3.13 - Stroboscobe
3.14 - Using the BLACKOUT / REMOTE button
You can modify colours via channels faders when using preset colours or sequences.
You can use the strobe function at any time, without necessarily selecting projectors.
The
BLACKOUT / REMOTE
button has two functions:
1 -
It allows you to zero out all of the console DMX outputs. The
BLACKOUT LED remains lit when the console is in blackout mode.
2 -
Pressing this button for more than 3 seconds allows you to activate
the console remote pilot via the optional EASY-2 remote control.
This mode deactivates all functions except for channels faders.
1 -
Make sure the BLACKOUT LED is off.
2 -
Launch user colours or preset colours sequence.
3 -
Select projectors via the
PROJECTOR SELECTOR
buttons.
4 -
Use the channels faders to adjust colours.
5 -
Press
DELETE/CLEAR
to go back to normal.
1 -
Press the
STROBE
button.
2 -
Without releasing this button, adjust the strobe speed via the
CHASE/STROBE SPEED
fader.
Important notes:
The strobe function only allows your projectors to flash white. In order to combine colours to the strobe, you will
be required to assign one of the available channels to the strobe function of your projectors.
The sequencing speed will be saved during the strobe speed configuration. However, if you stop the strobe
function and modify its settings, the most recent value will be saved.
