Ninja-7x15QC - 7x15W 4-in-1 LEDs ultra fast moving head
Page 9
English
Status Setting
Tilt Degree
TILT 270
TILT 240
Determine the TILT movement range :
• Tilt270
: 270° rotation
• Tilt240
: 240° rotation
Feedback
ON
/OFF
The projector sends movement feedbacks
Movement Speed
Speed
1
~ 4
Determines the AUTO mode movement speed :
1 = fastest ; 4 = slowest
Mic Sensitivity
0 ~ 99%
Configures the internal mic sensitivity when using
the music-sensitive mode
Hibernation
OFF
01m ~99m
(15m)
Sets a timer for the moving head to enter the sleep
mode if no DMX signal has been received.
The moving head will automatically resets when a
DMX signal is detected again.
The default value is 15 minutes.
Service setting
Service pass
Password = XXX
Password giving you access to the Service setting
menu : 050
RDM PID
XXXXXX
Unique identification code used for remote settings
via the DMX network.
The RDM protocol is made out of data packets
transmitted via DMX signals.
The RMD PID depends on the RDM compatible
controller.
Fans Control
Auto
High
Low
Allows you to configure the cooling fan speeds.
• Auto
: The projector controls its fans speed
according to its temperature.
• High
: Maximum fan speed.
• Low
: Decreases cooling speed. This is especially
useful to reduce the noise when an installation
requires silent devices.
Display setting
Shutoff time
02 ~60m
(05m)
Timer after which the display shuts off when it
remains inactive.
Flip display
ON/
OFF
Rotates the display on a 180° angle.
Key Lock
ON/
OFF
Locks the keyboard when it remains inactive for
more than 15 seconds.
They keyboard can be unlocked by holding the
menu button for more than 3 seconds.
Disp Flash
ON/
OFF
The display flashes when no DMX signal is
detected.
Temperature C/F
Celsius
/ Fahrenheit
Allows you to choose which unit of temperature will
be displayed.
Initial Status
Auto Program = XXX
PAN = XXX
....etc
Allows you configure the initial state of each
function when the projector is switched on.
Reset Default
ON/
OFF
Resets to factory settings.
Note
: user programs will be erased.
