Ninja-7x15QC - 7x15W 4-in-1 LEDs ultra fast moving head
Page 5
English
1 : Hook supports
2 : Hook
3 : Safety cable
(The current legislation requires a double holding system for any device used in public places. This system must bear at least
10 time the weight of the device. This means the Ninja-7x15QC safety wire must be able to bear approximately 55 kg).
4 : Quick-Lock wing nuts
The Ninja-7x15QC moving head is supplied with two Quick-Lock fastening systems.
The example above indicates how to install the Omega holders.
1
- Attach Omega holders or hook clamps to the Quick-Lock systems.
2
- Position your Omega - Quick-Lock systems on top of the drilled holes located below the Ninja-7x15QC.
3
- Rotate the Quick-Lock wing nuts a quarter turn.
CAUTION !
Please make sure the hanging
point is properly tightened.
Using a safety wire is
mandatory.
5 - Installing Quick-Lock fastening systems
