Ninja-7x15QC - 7x15W 4-in-1 LEDs ultra fast moving head
Page 8
English
This menu allows you to visualise the moving head running time, its temperature, and the current version of the internal
software.
This menu allows you to configure the moving head reactions, adjust the ventilation, customise the display and reset all
functions to factory settings.
7.2 INFORMATION
7.3 PERSONALITY
Submenus
Values
Description
Time Information
Current Time
Current running time since the unit was last switched on.
Total Run Time
Overall running time since the very first time the device
was switched on.
Last Run Time
Running time since the last running time reset.
Last Run Password
Password allowing you to reset the Last Run Time.
Clean Last Run
Allows you to reset the Last Run Time.
Temperature Info
Head Temperature
Temperature of the projector head (°C).
Software Version
V1.1.3 .....
Current version of the internal software.
Submenus
Lower level menus
Values
Description
Status Setting
Address via DMX
ON
/OFF
Activates addressing via a DMX controller.
No DMX Mode
Close/
Hold
/Auto/
Music
Configure the moving head reactions in case of
DMX signal interruptions :
• Close Shutter
: The projector blacks-out
• Hold
: The projector holds onto the last
information received
• Auto Program
: The projector activates the Auto
mode via built-in programs
• Music Control
: The projector activates the
Music-sensitive mode via built-in programs
Pan Reverse
ON/
OFF
Reverses PAN movements.
Tilt Reverse
ON/
OFF
Reverses TILT movements.
Pan Degree
Pan 540
Pan 540-90 Offset
Pan 630
Determine the PAN movement range :
• Pan540
: 540° rotation ( 1,5 turn)
• Pan540-90 Offset
: The projector rotates on a
540° angle but starts aligned with its base.
• Pan630
: 630° rotation ( 1,75 turn)
