Ninja-7x15QC - 7x15W 4-in-1 LEDs ultra fast moving head
Page 16
English
The Ninja-7x15QC moving head is supplied with two accessories allowing you to optimise and adapt its light output:
The Frost filter allows you to increase the beam aperture angle by 10°, to spread colours on wider areas.
Installing the Frost filter
: position the filter behind the filter holder, and use the 3 supplied screws as shown below.
Photometric datas with Frost filter are avalaible on the next page.
The spoiler decreases the beam angle by 1°, creating a very pure beam effect.
Installing the spoiler
: use the 3 supplied screws to tighten the spoiler to the head of the projector as shown below.
When using the spoiler you must set the TILT
movement range on 240° or the spoiler will abut
against the base of the moving head.
This can be configured in the PERSONALITY >
Status setting > Tilt Degree menu.
The default TILT movement settings is set on 240°.
When using both the Frost filter and the spoiler, it is crucial to
parameter the automatic modes speed on 2, 3 or 4.
This can be configured in the PERSONALITY > Status setting >
Movement speed menu.
9 - Accessories
9.1 FROST filter
9.2 Spoiler
