Contest LED GUN, Руководство пользователя

Страница: 10 / 12

Page 10
LED-GUN - 10W RGBW LED Multi-beam animation effects
English
4.8 - Using dipswitches
The drawing opposite describes the different modes
accessible via dipswitches.
1 - SPECIAL FUNCTIONS:
Position dip 1 onto ON to activate the automatic
mode.
- When dip 1 is ON, and dipswitches 3,4 5 and
6 are OFF: your LED-GUN is in music-sensitive
mode.
- When dip 1 is ON and one of the dip 3, 4, 5 and
6 are ON: your LED-GUN is in AUTO mode.
- When dips 1 and 2 are ON, your LED-GUN is in
manual mode. Dips 4, 5 and 6 then allow you to
adjust the speed.
2 - DIRECTION:
Position dip 3 onto ON to reverse the mirrors rotation.
3 - SPEED ADJUSTMENT:
Dips 4, 5 and 6 allow you to adjust shows speed when you are in AUTO mode. Turn off these three
dips to get the lowest speed, turn them on to get the fastest one. Intermediate combinations allow
different speeds.
4 - 2 LIGHT SHOW:
In Master / Slave mode, turn dip 10 ON to activate the 2 light show, reversing the mirrors movements
of the slave units while keep colours synchronised with the Master unit.
Regularly cleaning lenses and mirrors will guarantee an optimal light output.
These cleaning procedures must be performed as often as possible, especially if your LED-GUN is
installed in dusty environments, or smoke machines are used nearby.
- Use a standard glass cleaner to clean mirrors and lenses.
- Use a soft cloth to dry the humid areas.
- We strongly recommend to clean the lenses every 20 uses, while cleaning the mirrors each 30
uses.
WARNING! As dangerous electrical parts are accessible within the housing, it is crucial to
disconnect your LED-GUN before performing cleaning procedures.
1
2
3
4
5 - Maintenant and cleaning