Contest LED GUN, Руководство пользователя

Страница: 7 / 12

Page 7
LED-GUN - 10W RGBW LED Multi-beam animation effects English
Connect the your device to an electrical outlet.
In Master / Slave mode, connect the slave units to the DMX output of the Master device.
The DMX input of your master device must not be connected.
In DMX mode, connect the DMX remote control to the input of your first device, then daisy-chain the
other units.
4.3 - Connections
4.4 - = Master / Slave mode
Entrée DMX Sortie DMX
DMX Adress Select
1 2 4 8
16 32 64
128 256
Option
Power Input
230V - 50Hz
Fuse
T2A - 250V
DMX In
DMX Out
Only for
Easy-2
Controller
Mic
Model : LED-GUN
Code : 9541
Power : 230V - 50Hz - 12,5W max.
Fuse :
T2A - 250V
DMX Adress Select
1 2 4 8
16 32 64
128 256
Option
Power Input
230V - 50Hz
Fuse
T2A - 250V
DMX In
DMX Out
Only for
Easy-2
Controller
Mic
Model : LED-GUN
Code : 9541
Power : 230V - 50Hz - 12,5W max.
Fuse : T2A - 250V
DMX Adress Select
1 2 4 8
16 32 64
128 256
Option
Power Input
230V - 50Hz
Fuse
T2A - 250V
DMX In
DMX Out
Only for
Easy-2
Controller
Mic
Model : LED-GUN
Code : 9541
Power : 230V - 50Hz - 12,5W max.
Fuse :
T2A - 250V
Connect the DMX IN to DMX OUT of your devices in order for the first unit to control the others. Its
internal microphone will synchronise the animations of all devices.
This function allows you to create precise lighting effects.
The master unit is easy to spot as it is the only one not connected via its DMX input.
The Master / Slave function overrides all dipswitches but requires the dipswitch 1 of the Master unit to
be activated.
Activating the Master / Slave mode:
- The master unit must have dipswitch 1 positioned onto ON, while all others are OFF.
- The slave units must have dipswitch 1 positioned onto OFF, the position of their other dipswitches
does not matter.
Reversing the Slave units movements:
When dipswitch 10 is positioned onto OFF, the slave unit will mimic the Master unit movements.
However, when dipswitch 10 is positioned onto ON, the slave unit is in reversed mode, meaning its
colours remain synchronised to the Master unit, but its movements are reversed.
Dipswitch 10 must be reversed in DMX mode.
1
2
R
3
Ÿ:
- You will be required to acquire a 5-pin to 3-pin adapter when using a 5-pin XLR
remote control.
- If setting up a large DMX circuit (more than 100m), we strongly recommend to use
an end termination (120 Ohms resistor placed between pins 2 and 3 of your XLR
socket), as described by the drawing opposite.
DMX input
DMX output