Contest LED GUN, Руководство пользователя

Страница: 6 / 12

Page 6
LED-GUN - 10W RGBW LED Multi-beam animation effects
English
1 - Hanging bracket
Allows you to fix your device to structures.
It is mandatory to use a safety cable when
setting up your device in public places.
2 - Microphone
Allows music-sensitive modes.
3 - Remote control input
Allows you to connect your EASY-2 remote
control.
Only this remote control is compatible with
the LED-GUN, please do not try to connect
other remote controls as it may cause severe
damages to the internal components of your
device.
4 - DMX Output
Allows you to daisy-chain more units.
5 - DMX Input
Allows you to receive an incoming signal from
a controller or Master unit.
4.2 - Description
DMX Adress Select
1 2 4 8
16 32 64
128 256
Option
Power Input
230V - 50Hz
Fuse
T2A - 250V
DMX In
DMX Out
Only for
Easy-2
Controller
Mic
1
3
2
4
5
6
7
8 9
Model : LED-GUN
Code : 9541
Power : 230V - 50Hz - 12,5W max.
Fuse : T2A - 250V
6 - Fuse
Protects your LED-GUN. If need to replace
this fuse, please make sure the new one is a
2A, 5 x 20 mm fuse.
Do not use a more powerful fuse as the LED-
GUN internal wiring was not designed to resist
to more important loads.
7 - Power input
Connect here the supplied power cord.
8 - Dipswitches
Allow you to configure the behaviour of your
device in Auto mode or set the initial DMX
address.
Please refer to paragraph 4.4, 4.6 and 4.8 for
more details.
9 - LED
This LED indicates the status of your device:
- In auto mode, it lights up for each sound
impulse.
- In DMX mode, it regularly and constantly
flashes.