Contest LED GUN, Руководство пользователя

Страница: 5 / 12

Page 5
LED-GUN - 10W RGBW LED Multi-beam animation effects English
2 - Introduction
3 - Specifications and installation
4 - Getting started
Thank you for purchasing the LED-GUN.
It features a new, revolutionary TRI technology producing incredible colours.
Its high-quality optical system creates laser-like, colour full effects.
The LED-GUN has an important lifespan, extended by its 1.8° stepper motor.
This technology allows fluid and precise movements even in music-sensitive mode.
The LED-GUN was designed to be attached to structures or on the ground, via an adapted support.
We strongly recommend to use a double hanging system with safety cable in case of failure of the main suspension
bracket. The safety cable must be able to bear 10 times the weight of the LED-GUN.
The installation must be performed by a qualified technician.
Please make sure that no one can reach the projector once it is set up.
3.1 - Technical specifications
• Light source: RGBW CREE LED
• LED: 10W
• Advanced LED technology (lifespan of 30 000 hours approximately)
• 57 incredibly sharp beams
• Low temperature, low power consumption, can be operated non-stop for many hours
• Modes:
- DMX
- Automatic
- Music-sensitive
- Compatible with the Easy-2 remote control
• 1 or 3 DMX channels: Dimmer/strobe, colours, rotation
• Master / Slave (Music-sensitive or automatic)
• Beamwidth: 60°
• Cooling fan
• Power supply: 100~240V, 50/60Hz
• Power consumption: 25,3 Watts
• Dimensions: 271 x 176 x 213 mm
• Net weight: 4 kg
3.2 - Installation
Your LED-GUN is not equipped with any power switch.
As a result, your device is ready to go as soon as it is connected to an electrical outlet.
Once powered up, your LED-GUN will perform an initialisation before being fully operational.
If dipswitches are in automatic mode, it will launch its internal programmation by itself, however if a DMX signal is
detected via the DMX input it will await DMX information.
4.1 - Initialisation