IPSPOTQC
- 7 and 15x5W quadricolor LEDs waterproof projectors
Page 5
English
5 - Rear panel
1
Power input socket
Allows you to connect the projector to an electrical
outlet.
Please make sure the voltage is in adequation with
the product indications.
2
Power output socket
Allows you to link two projectors together via a
Male/Female IEC cord. You can daisy chain up to
8 projectors.
Warning
: Please make sure you do connect more
than 700W of projectors to the same power supply
unit.
3
DMX input
3-pin female XLR plug hardwired as follows:
- Mass: 1
- Negative signal: 2
- Positive signal: 3
4
DMX output
3-pin male XLR plug hardwired as the DMX input
socket.
5
Display
Allows you to configure the projector. Please refer
to the next paragraph for more details about menus.
6
MODE button
Allows you to enter menus and select functions.
7
SETUP button
Allows you to configure the functions selected with
the MODE button.
8
UP button
Press UP to increase the adjustable values or
browse submenus.
9
DOWN button
Press DOWN to decrease the adjustable values or
browse submenus.
5
1
3
4
6
7
2
9
8
