IPSPOTQC
- 7 and 15x5W quadricolor LEDs waterproof projectors
Page 7
English
Playing user
programs
Starts the user program
Allows you to set the duration of the user program
Configures the fade out time of every step of the program
Allows you to set the flash rate of every step of the program
Allows you to configure the max output (dimmer) of every step of
the program
Editing user
programs
Allows you to configure the number of steps of your user program.
20 steps max.
Selects the steps you want to create/modify
Red level settings for the selected step
Green level settings for the selected step
Blue level settings for the selected step
Infrared
remote control
Activates or deactivates the use of an infrared remote control to
control the projector.
Fixed colour and
sequences
Mode RGBW
colours
White level settings for the selected step
Mode RGBW
strobe
RGBW mode: Strobe speed : F5.00 = no strobe ; F5.99 = Max
speed
Mode RGBW
speed
RGBW mode: Steps sequencing speed settings and crossfades
RGBW dimmer
Red from 0 - 100%
Green from 0 - 100%
Blue from 0 - 100%
White from 0 - 100%
Strobe
Strobe speed : F5.00 = no strobe ; F5.99 = Max speed
Auto mode
Activates the auto mode
Strobe
Strobe speed : F5.00 = no strobe ; F5.99 = Max speed
Slave mode
Activates the slave mode
Note
:
- The DMX mode choice does not require particular settings as you can only parameter the DMX address in this
mode.
- In auto mode, you can only adjust the strobe speed.
