Contec GPIB-FL2-USB, Справочное руководство

Страница: 7 / 60

—
Introduction
—
GPIB-FL2-USB Reference Manual
— 7 —
3. Features

Capable to communicate with GPIB communication
which is compatible to IEEE-488.1/488.2 standards at
1.5 M byte/sec maximum
Capable to communicate with any equipment which is compatible to IEEE-488.1/488.2 standards with transfer rate at 1.5 Mbyte/sec
maximum. Capable to set this product to whether a master (controller) or a slave.

Compatible to USB1.1/USB2.0 and bus power-
driven eliminating the need for external power.
Compatible to USB1.1/USB2.0 and capable to achieve high speed transfer at HighSpeed (480 Mbps).
The product is driven by bus power from USB, which eliminates the need for external power. In addition, with the USB cable (1.8 m)
included in this package, it can be connected to any equipment with GPIB interface without any GPIB cables.

Employs a buffer memory, 2 Kbytes for
transmission and 2 Kbytes for reception.
Employs a buffer memory, 2 Kbytes dedicated to transmission and 2 Kbytes dedicated to reception, in order to reduce the load to the
CPU when transmitting/receiving data.

Windows/LabVIEW compatible support software is
offered.
The support software offered on the CONTEC website makes it possible to create applications of Windows/LabVIEW. In addition,
supplies a diagnostic program to confirm hardware operation and to perform a basic communication test with connected equipment.

Employs a high speed GPIB controller developed
by CONTEC and provides steady-supply
This product employs CONTEC's self- developed high speed GPIB controller (μPD7210 register -compatible), which provides users
steady-supply with peace of mind.

Built-in SPAS event function (when slaving)
In addition to the functions of the earlier GPIB controller (μPD7210), the product also supports the SPAS event generated when a serial
poll occurs. This gives users a high level of flexibility in constructing the system.