Contec GPIB-FL2-USB, Справочное руководство

Страница: 13 / 60

—
Safety Precautions
—
GPIB-FL2-USB Reference Manual
— 13 —
2. Handling Precautions
DANGER

Do not use the product in locations exposed to a flammable or corrosive gas. It may cause
explosion, fire, electrical shock, or malfunction.
CAUTION

Do not strike or bend this product.
Otherwise, this product may malfunction, overheat, cause a failure or breakage.

Make sure that your PC can supply ample power to all this product installed.
Insufficiently energized products could malfunction, overheat, or cause a failure.

It may cause a trouble in recognizing and operating the device according to the kind of USB
hub.

As this product contains precision electronic components, do not use or store it in the
environments subject to shock or vibration. Otherwise the product may malfunction,
overheat, cause a failure or breakage.

Do not use or store the product in a hot or cold place where the temperature exceeds the
specified range, or in a place that is subject to severe temperature changes.
Otherwise the product may malfunction, overheat, cause a failure or breakage

Do not use or store the product in a place subject to direct sunlight or near a heating device,
such as a stove. Otherwise the product may malfunction, overheat, cause a failure or
breakage.

Do not use or store the product near equipment generating a strong magnetic field or radio
waves. Otherwise the product may malfunction, overheat, cause a failure or breakage.

Do not touch this product's terminals (USB connector, Interface connector) with your hand.
Otherwise, the product may malfunction, overheat, or cause a failure.
If the terminals are touched by someone's hands, clean the terminals with industrial alcohol.

Do not touch the interface connector when the power is on.
Otherwise the product may malfunction, overheat, cause a failure due to static electricity.

Do not plug or unplug the internet connector when the power is on. This may cause a failure.

Do not operate switches when the power is on. This may cause a failure.

When connecting multiple units, set one unit at a time. Complete the setup before starting to
connect the next unit.

The specifications of this product are subject to change without notice for enhancement and
quality improvement.
Even when using the product continuously, be sure to read the manual and understand the
contents.

Do not modify or disassemble the product. CONTEC will bear no responsibility for any
problems, etc., resulting from modifying or disassembling the product.