Contec GPIB-FL2-USB, Справочное руководство

Страница: 50 / 60

—
Functions
—
GPIB-FL2-USB Reference Manual
— 50 —
1. Basic GPIB Function

Master/Slave function
The converter can be used as either the master (controller) or slave, depending on a setting in the
property page.
When used as the master, the converter can send IFC (Interface Clear) at any timing and control the
REN (Remote Enable) line.

Communication function
The converter can send and receive data in accordance with the IEEE 488 Standard. You can add
delimiters and EOI (End Of Identify) to outgoing data depending on the software settings.

Serial poll/parallel poll/SRQ send functions
The following functions can be used depending on the master/slave configuration.
Master

Serial poll

Parallel poll
Slave

Status byte setting

SRQ (Service Request) transmission

Response to parallel polling
My address setting
The GPIB address (my address) of the converter can be set in Property page.
No setting is required on the converter.