Contec FXA3000 Series, Руководство пользователя, Страница: 37 / 113

4. Setup and Status Display
30 FXA3000 Series
When "Enable" repeater independent, the repeater access point (VAP1) and the repeater station (VAP2)
operate independently and separately. Regardless of whether the repeater stations (VAP2) are connected
to the access point, the repeater access point (VAP1) operates. The repeater station (VAP2) can only be
connected to the access point same channel setting.
Default setting : Enable
WLAN Standard
Select the wireless networking standard to use on the device.
When the unit type is "Station", the "Auto" selection appears. Auto means both "IEEE802.11n(5GHz)"
and "IEEE802.11n(2.4GHz)". If you want to allow connections to both the 5GHz and 2.4GHz wireless
networks, select "Auto". When set to "Auto", dual channel mode is fixed as "Enable".
Default setting : IEEE802.11n (2.4GHz)
Dual Channel Mode
This setting can only be configured when the wireless networking standard is "IEEE802.11n(5GHz)" or
"IEEE802.11n(2.4GHz)". To set the wireless networking bandwidth to 20 MHz, select "Disable". To set
it to 40 MHz, select "Enable". However, even when set to "Enable", if the connected wireless device
has dual channel mode set to "Disable", the bandwidth is 20 MHz. When set to "Enable", communication
is performed with a bandwidth of 40 MHz when possible.
Default setting : Disable
Channel
This setting is available when the unit type is "Access Point" or "Repeater". Select the channel to use on
the device. The channel that can be used changes according to the selected wireless networking standard
and unit type.
Default setting : 1
WLAN Infrastructure Mode
Select the operation mode for the device. There are three types of operation modes: "Standard
Infrastructure", "Compatible Infrastructure", and "Advanced Infrastructure". When the unit type is
station, "Advanced Infrastructure" cannot be selected.
Default setting : Advanced Infrastructure