Contec DAI12-4FITGY, Руководство пользователя, Страница: 13 / 65

Module Nomenclature and Settings
8
DAI12-4(FIT)GY
Setting a Device ID
The controller module distinguishes and keeps track of the modules that are connected
to it by assigning device IDs to them. Each module, therefore, should be assigned a
unique ID.
A Device ID can be assigned in a 0 - 7 range, so that a maximum of eight modules can
be distinguished.
To connect the DAI12-4(FIT)GY to the DAI12-4(USB)GY, assign a device ID between
1 and 3.
The factory setting for the Device ID is [0].
Setup Method
A Device ID can be set by turning the rotary switch on the device face.
To set a Device ID, turn the switch knob.
Figure 2.2. Setting a Device ID
LED Indicator
RUN: Indicates that the DAI12-4(FIT)GY can be controlled from the
Controller Module (green).
STATUS: This light comes on when a D/A conversion error occurs (red).
Device
ID
0
4
0
4
6
2
5
1
3
7
Factory settings:
(Device ID = 0)