Manual Power Supplies
Detection
Choose
DETECTION
to alter the actions when a low current or a power failure is detected.
•
Low Current
When a very low current is detected as soon as the Voltage limit has been reached, the power will
shut down the procedure. An
audible error message
will be given.
•
Power Failure
When the detection of a power failure is enabled, the power supply will continue to proceed the
procedure if the timer was still running at the moment that the power failure occurred. After
powering it again, the power supply will automatically proceed with the experiment for the
remaining time.
1.
Follow these steps to select
LOW CURRENT
and press
:
PROCEDURE?
MANUAL
METHOD
SETUP
SYSTEM
DETECTION
DATA
INFO
DETECTION
LOW CURRENT
POWER FAIL
2.
Decide whether or not the output voltage should shut down at a too low output current and
press
.
3.
Select
POWER FAIL
and press
.
4.
Decide whether or not the instrument should proceed with the experiment for the remaining
time after a power failure and press
.
Data
To be added, check our website (
www.consort.be/wiki
) for firmware updates of the instrument.
This feature will allow to log all information about the executed procedures.
Info
Choose
INFO
to find specific information about the device, the parameter limits, the firmware version
and more:
PROCEDURE?
MANUAL
METHOD
SETUP
SYSTEM
DETECTION
DATA
INFO
Rev. 1605
5
