Consilium SELUX ST, Инструкция по установке и обслуживанию

Страница: 101 / 180

RADAR CONFIGURATION
3.28 Rev. E
If the USB memory is mounted on Antares Assy for the first time the following window will
be displayed:
Figure 3.13.3 USB Storage
To operate trough the Memory Stick a directory file tree is needed in the USB memory:
A directory named “selux” shall be created in the root of the USB memory and it should
contain other directories named “logs”, “maps”, “screenshots”, “setup”, and “update”.
If this is not the case the picture on the left will be displayed and the only action possible
will be “Format Module”, which will not erase the files in USB Module, but just create the
needed directory tree.
By pressing the “Format Module” button the window will change as the first picture of this
page and it will be possible to operate over all the facilities.
The USB flash disk will be mounted in /mnt/usb and the USB STORAGE Menu will appear
as shown by the following picture.
The figure shows
the possibility to store maps, backup setup files, system logs and
screenshot pictures on the flash disk and to get maps, backup setup files and to upgrade
the Selux-ST software from the flash disk.
This is a list of the sub-directories that can be found under the Selux directory.
• Maps maps
: All files *.map.
•
setup : Sub-directories named NAME_XXXXX_cfg, where NAME given when it was
stored (usuallyown ship name) and XXXXX is the serial number of the ANTARES
p.c.b.
• update
: All console update packages.