Consilium SELUX ST, Инструкция по установке и обслуживанию

Страница: 86 / 180

RADAR CONFIGURATION
3.13 Rev. E
3.8.1
Transceiver Communication Type
Pressing the
A
button in of
Fig
3.7.1 the following list will be open:
The list permits to select the communication’s type used to control the transceiver.
Other Comm:
for any transceiver that cannot be controlled by the console but is still able
to generate the appropriate video, trigger and antenna synchronism signal;
Serial Comm:
for the standard connection with RS232 serial line
SXI n Comm: for video combined connections, all the signals needed are combined with
the video on only one coaxial cable; "
n
" is the console priority for that transceiver.
Higher numbers have higher master priority than lower ones.
CAUTION
PRIORITY NUMBERS ARE IMPORTANT AND SHOULD NOT BE MIXED
UP. IF THE SETUP HAS TO BE TRANSFERRED FROM CONSOLE TO
CONSOLE TROUGH A MEMORY STICK, CHECK THAT PRIORITY IS
NOT THE SAME IN ANY OF THE CONSOLES CONNECTED TO THE
SAME RADAR INPUT. TWO CONSOLES WITH SAME PRIORITY,
TRYING TO BE MASTER OF THE SAME TRANSCEIVER WILL SEND
CONFLICTING COMMANDS AND MAKE IT JUMP EVENTUALLY
TROUGH DIFFERENT PRFS OR TUNING SETTINGS.