Consilium SELUX ST, Инструкция по установке и обслуживанию

Страница: 57 / 180

SERIAL INTERFACE SPECIFICATION
2.22 Rev. E
RTE – Routes
Waypoint identifiers, listed in order with starting waypoint first, for the identified route. Two
modes of transmission are provided: "c" indicates that the complete list of waypoints in the
route is being transmitted; "w" indicates a working route where the first listed waypoint is
always the last waypoint that had been reached (FROM), while the second listed waypoint is
always the waypoint that the vessel is currently heading for (TO) and the remaining list of
waypoints represents the remainder of the route.
$--RTE, x.x, x.x, a, c--c, c--c,...... c--c*hh<CR><LF>
Waypoint "n" identifier (see Note 1)
Additional waypoint identifiers (see Note 1)
Waypoint identifier
Route identifier
Message mode: c = complete route, all waypoints
w = working route, first listed waypoint is "FROM",
second is "TO" and remaining are rest of route
Sentence number (see Note 2)
Total number of sentences being transmitted (see Note 2)
NOTE 1
A variable number of waypoint identifiers, up to "n", may be included within
the limits of allowed sentence
length. As there is no specified number of waypoints, null fields are not
required for waypoint identifier fields.
NOTE 2
A single route may require the transmission of multiple sentences, all
containing identical field formats when sending a complex message. The
first field specifies the number of sentences, minimum value = 1. The
second field identifies the order of this sentence (sentence number),
minimum value = 1. For efficiency, it is permitted that null fields be used in
the additional sentences when the data is unchanged from the first
sentence.
(Note that this practice can lead to the incorrect assembly of sentences if
there is a high risk of loss of sentence.).