27
b) "TIMER" function (training time)
Press the "SEL" button (C) in "HRM" mode until "TIMER" is displayed at the bottom.
After a short while, the display switches to training time (1).
Training time is displayed automatically when the chest strap is put on and
data is transmitted to the heart rate monitor.
Training time is the total time during which data from the chest strap is
received.
Training time can be deleted by holding down the "SET" button (A) for 3
seconds.
Use the "SET" button (A) to switch between four different displays:
• Total training time
• Time you have spent within the selected training zone, " " symbol
• Time you have spent above the selected training zone (heart rate too high), " "
symbol
• Time you have spent below the selected training zone (heart rate too low), " "
symbol
