24
13. "CHRONO" mode (stopwatch)
a) Selecting a function
Press the "MODE" button (D) until "CHRONO" is displayed.
Press the "SEL" button (C) to switch between the individual
functions.
• "CHRONO" (stopwatch)
• "DATA RECALL" (see lap data)
The "DATA RECALL" function can only be used if lap data has already been
saved.
A maximum of 30 laps/interval times can be saved. When
memory is full, "MEMORY FULL" is displayed as illustrated
on the right.
b) Using the stopwatch
• Press the "SET" button (A) to start or stop the stopwatch.
• Use the "SEL" button (C) to save the lap time (as described in chapter 13.b), a
maximum of 30 lap times can be saved).
• To reset the stopwatch to "00:00:00", first press the "SET" button (A) to stop the
stopwatch. Then hold down the "SET" button until "00:00:00" is displayed.
