22
g) Stopping the alarm/wake-up signal
When the alarm goes off at the set time (or date), it can be stopped by pressing the
"SET" button (A), the "LIGHT" button (B), or the "SEL" button (C).
h) Switching the alarm/wake-up function on/off
When the alarm/wake-up time is displayed, press the "SET" button (A) to switch the
alarm/wake-up function on or off.
When the alarm/wake-up function is switched on, the "
" symbol in displayed in the
bottom right-hand corner.
i) Programming the countdown timer
In "TIME" mode (see chapter 12. a), press the "SEL" button
(C) until "TIMER" is displayed.
Proceed as follows:
• Hold down the "SET" button (A) for about 3 seconds until
the minutes of the timer start flashing.
• Use the "SEL" button (C) to set the minutes of the timer. For quick changes, hold down
the button for a longer period of time.
• Press the "SET" button (A). The hours of the timer start flashing.
• Use the "SEL" button (C) to set the hours of the timer. For quick changes, hold down
the button for a longer period of time.
• Press the "SET" button (A). The timer function starts flashing on the display. There
are three possible settings as illustrated on the next page.
