manualshive.com logo in svg

Conrad MZK-W04NU, Руководство по эксплуатации, Страница: 9 / 76

Поделиться
Скачать
Conrad MZK-W04NU Скачать руководство пользователя страница 9

8

Back Panel—Ports

Ports

Function

USB

Connect a USB storage device with MZK-W04NU through USB port, and then users can
share files on the network.

LAN

Use standard LAN cables (RJ45 connectors) to connect your PCs to these ports.
Any LAN port can be connected with another hub, if required.

WAN

Connect a DSL or Cable Modem to the WAN port and link to the internet. If your modem
came with a cable, use the supplied cable. Otherwise, use a standard LAN cable.

Power

Plug the power cord into this port and the other side of the adaptor should be plugged into
the socket.

Button

Function

Usage

Reset

Reset to default

Press and hold the reset button for 20 seconds, and release
the button. All the settings will be reset to default value after 1
minute. Note: During the resetting process, do not unplug
MZK-W04NU’s power cord.

WPS

Build wireless 

Press the button and build a connection between MZK-W04NU

connection

and a station (adapter).

Содержание MZK-W04NU













































































Отзывы:

Нет отзывов