manualshive.com logo in svg

Conrad MZK-W04NU, Руководство по эксплуатации, Страница: 64 / 76

Поделиться
Скачать
Conrad MZK-W04NU Скачать руководство пользователя страница 64

63

4.2. File Server Settings

Although the product serves as a file serve when a USB storage device is attached to it, a workgroup
and user accounts need to be configured to access the partitions created on the storage device. 
This section describes how to configure/create a workgroup and a user account.

4.2.1. Basic Settings

MZK-W04NU must be in the same workgroup with the computer to let users access the file server
through network. 

•

File Sharing: Click to enable File Server function. 

•

Workgroup Name: Enter the name of workgroup which has already been configured on your com-
puter. For example, “Workgroup” on your computer, the Workgroup Name on MZK-W04NU must be
“Workgroup”, too. If a different workgroup name is used, the file server icon will not be displayed on
My Network window of the computer.

•

Server Name: Give your File Server a distinguishable name or leave it as default.  

•

Apply: Click this button to save the settings.

•

Clear: If there is anything wrong with the settings you made, you can click “Clear” to configure the
page again.

4.2.2. User Settings

After configure the Basic Settings of MZK-W04NU, you’ll have to create user accounts to let users share
files on the network.

Содержание MZK-W04NU













































































Отзывы:

Нет отзывов